Instruction:
Confirm whether the inkjet nozzle was blocked
Use the cleaning program to cleaning the nozzle 2 times, Check the main place which could not be printed clearly before, it not much improved, that¡¯s block, if changed, there should be something wrong with your cartridge.
Change the cartridge and see if there¡¯s improved, and judge according to the step 1
Cleaning the nozzle without taking it down
When the power is on, press the ink change button to the ink change position,(Don't take out the ink cartridge from the printer)then shut off the power directly, suck some liquor by the injector, cover the other side of the rubber tube to the place where you want to cleaning, Push the injector slowly and let the liquor out., (Don¡¯t Spend Too Much Strength On It). Especially: If the rubber tube slides out from the injector when injecting and the liquor. Must not open the machine until the liquor volatilize completely. Otherwise, the main board would be burned
Start on the printer, press the ink change button to the ink change position,(please not don¡¯t move the cartridge)inject some liquor to the hermetical cover. Let the cartridge goes back and marinate for about 8 hours
|
|
|
|
|
